RS232/V.10 Interface card

Fachforen für Entwickler und Bastler
Benutzeravatar

Topic author
M1ECY
Rank 7
Rank 7
Beiträge: 686
Registriert: Fr 11. Aug 2017, 13:13
Wohnort: Hitchin Hertfordshire, UK
Hauptanschluß: 669089

Re: RS232/V.10 Interface card

#11

Beitrag: # 33331Beitrag M1ECY »

So, checking stock, I only have the USB card with development area - not so helpful.

I have a version 1.00 double current card - I will sacrifice this to use for development - I will "piggyback" the RS232 converter on some perf board.
669089 Siemen G - T100S Online 24H
299709 Antosh G - Creed 444 - Double Current R + D (0800 - 2100) and a bit tempremental
459724 NC
Benutzeravatar

FredSonnenrein
Founder
Founder
Beiträge: 2317
Registriert: Fr 3. Jun 2016, 13:49
Wohnort: Braunschweig
Hauptanschluß: 8579924 hawe d

Re: RS232/V.10 Interface card

#12

Beitrag: # 33333Beitrag FredSonnenrein »

Super, now it’s clear.

But another question: is it necessary to ‚echo‘ the keyboard input to the printer output or does this the T1000 by itself?
Grüße,
Fred Sonnenrein, Braunschweig
i-Telex 952741 (Lo133), 8579924 (T100s), 781272 (T100), 792911 (T68d) oder 531072 (T.typ.72)
Bei besetzt oder gestört bitte 531002 versuchen.
Benutzeravatar

Topic author
M1ECY
Rank 7
Rank 7
Beiträge: 686
Registriert: Fr 11. Aug 2017, 13:13
Wohnort: Hitchin Hertfordshire, UK
Hauptanschluß: 669089

Re: RS232/V.10 Interface card

#13

Beitrag: # 33334Beitrag M1ECY »

This is a good question Fred - I do not currently know the answer.

I will retrieve the ASR machine from storage and bring it back to life
Folgende Benutzer bedankten sich beim Autor M1ECY für den Beitrag:
roliw
669089 Siemen G - T100S Online 24H
299709 Antosh G - Creed 444 - Double Current R + D (0800 - 2100) and a bit tempremental
459724 NC
Benutzeravatar

Topic author
M1ECY
Rank 7
Rank 7
Beiträge: 686
Registriert: Fr 11. Aug 2017, 13:13
Wohnort: Hitchin Hertfordshire, UK
Hauptanschluß: 669089

Re: RS232/V.10 Interface card

#14

Beitrag: # 33349Beitrag M1ECY »

Hi Fred,

ASR machine is now on the bench.

I can report that the machine already types and prints in local mode, even without any line connection (In fact even with no LAT installed at all :) )

I will see what I can do when I repair the LAT card - hopefully the same will apply.

Reading the T1000 manual on the forum, at least the keyboard dialling is meant to work - Again, I hope to verify shortly.
669089 Siemen G - T100S Online 24H
299709 Antosh G - Creed 444 - Double Current R + D (0800 - 2100) and a bit tempremental
459724 NC
Benutzeravatar

Topic author
M1ECY
Rank 7
Rank 7
Beiträge: 686
Registriert: Fr 11. Aug 2017, 13:13
Wohnort: Hitchin Hertfordshire, UK
Hauptanschluß: 669089

Re: RS232/V.10 Interface card

#15

Beitrag: # 33394Beitrag M1ECY »

Hi Fred,

I managed to find some documentation for the crazy English T1000 (sadly not a service manual)
TGN Signalling data.PNG
From my reading of the ITU document relating to V.10 I would say that this is the interface standard that works with the T1000.

Regards
Sean
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
669089 Siemen G - T100S Online 24H
299709 Antosh G - Creed 444 - Double Current R + D (0800 - 2100) and a bit tempremental
459724 NC
Benutzeravatar

FredSonnenrein
Founder
Founder
Beiträge: 2317
Registriert: Fr 3. Jun 2016, 13:49
Wohnort: Braunschweig
Hauptanschluß: 8579924 hawe d

Re: RS232/V.10 Interface card

#16

Beitrag: # 33395Beitrag FredSonnenrein »

Okay... I will provide a test software for the RS232-Card
Grüße,
Fred Sonnenrein, Braunschweig
i-Telex 952741 (Lo133), 8579924 (T100s), 781272 (T100), 792911 (T68d) oder 531072 (T.typ.72)
Bei besetzt oder gestört bitte 531002 versuchen.
Benutzeravatar

FredSonnenrein
Founder
Founder
Beiträge: 2317
Registriert: Fr 3. Jun 2016, 13:49
Wohnort: Braunschweig
Hauptanschluß: 8579924 hawe d

Re: RS232/V.10 Interface card

#17

Beitrag: # 33400Beitrag FredSonnenrein »

Hi Sean,
i'm sorry for not reading your posts correctly. YOu want to use the double current board as a base. Ok, generally possible. Another possibility is to use the USB card with the development area in the following way:
- Keep the USB interface unchanged
- Remove the parts for the TW39 interface (at least the optocouplers and the resistor at the control path to the relay)
- Use the development area and make connections to the controller dedicated to the TW39 for your tests.

Does the T1000 V.10 interface really need the negative polarity? How does the T1000 react if you use only +5 volt and "gnd"?
Grüße,
Fred Sonnenrein, Braunschweig
i-Telex 952741 (Lo133), 8579924 (T100s), 781272 (T100), 792911 (T68d) oder 531072 (T.typ.72)
Bei besetzt oder gestört bitte 531002 versuchen.
Benutzeravatar

obrecht
Rank 6
Rank 6
Beiträge: 503
Registriert: Fr 26. Jun 2020, 18:53
Wohnort: Aachen
Hauptanschluß: 833539 fili d

Re: RS232/V.10 Interface card

#18

Beitrag: # 33401Beitrag obrecht »

FredSonnenrein hat geschrieben: Di 13. Sep 2022, 08:57 Does the T1000 V.10 interface really need the negative polarity? How does the T1000 react if you use only +5 volt and "gnd"?
I don't know the T1000, but for FS200/V.10 I can say that it is unstable without negative polarity. Therefore I used a MAX232 for proper signal conversion; Jochen did it the minimalistic way and inserted a "pull up" resistor in his circuit:

https://github.com/fablab-wue/piTelex/w ... ple_V10RPi
Viele Grüße,
Rolf

833538 obrac d  24/7  (FS220)
833539 fili d   24/7  (T100a)
833540 rowo d   24/7  (T100/R) 
71920 actelex d 24/7  (T68d)
833541 obby d   24/7  (T37h)
833142 rolf d   24/7  (Lo15A) (pi-telex ist endlich fertig!)

Sidro
Rank 2
Rank 2
Beiträge: 89
Registriert: So 31. Jul 2022, 18:46
Wohnort: 70190 Stuttgart
Hauptanschluß:

Re: RS232/V.10 Interface card

#19

Beitrag: # 35437Beitrag Sidro »

Little late my reply,

I use a MAX3232 with V.10 Interface of my FS-200.
When powered with 3.3V it gives perfect signal level for V.10 Interface.

All the Best,

Isidro
Folgende Benutzer bedankten sich beim Autor Sidro für den Beitrag:
obrecht
Viele Grüsse, Isidro

210567 sidrst d FS-200 : Zeitweise erreichbar, da Stromsparer nicht fertig
210568 sidrst d i-telex : Testsystem Offline, da gerade ohne Internet für Maschinenreparatur im Einsatz
Benutzeravatar

obrecht
Rank 6
Rank 6
Beiträge: 503
Registriert: Fr 26. Jun 2020, 18:53
Wohnort: Aachen
Hauptanschluß: 833539 fili d

Re: RS232/V.10 Interface card

#20

Beitrag: # 35440Beitrag obrecht »

Sidro hat geschrieben: So 1. Jan 2023, 13:57 Little late my reply,

I use a MAX3232 with V.10 Interface of my FS-200.
When powered with 3.3V it gives perfect signal level for V.10 Interface.

All the Best,

Isidro
As far as I can tell the FS200 doesn't mind the PM 9V of MAX232 powered at 5V
Viele Grüße,
Rolf

833538 obrac d  24/7  (FS220)
833539 fili d   24/7  (T100a)
833540 rowo d   24/7  (T100/R) 
71920 actelex d 24/7  (T68d)
833541 obby d   24/7  (T37h)
833142 rolf d   24/7  (Lo15A) (pi-telex ist endlich fertig!)
Antworten

Zurück zu „Entwickler-Ecke“