I have almost finished restoring my T1000Z - took me 4 months
I took it completely apart(not the printer). I changed all the electrolytics and tantalum caps, except for the 2 large electrolytic caps in the power supply sitting in those black plastic cylinders.
I have it working on local loop, but it is doing strange things.
If I try to type on the keyboard and punch a tape, it works for anywhere from 2 characters to half a line, but then it stops punching and go into a hold mode. I then have to press the "I" button to activate the keyboard again.
How can I prevent this from happening ?
Next problem - how do I connect it to a demodulator ? There was a sticker on the case that said 60vdc and 40 mA.
Is there a power supply inside that has this voltage ? There must be something, because it works on local mode.
There is a cable that comes out and it has multiple colored wires. The 1/4" plug was ripped off accidentally,
so I don't know how to hook it up to a demodulator. Do I need a separate power supply for this ? Or does it work by polar relays ?
I have no idea how to connect this to my dovetron terminal unit, or my HAL ST-6000
Need help please !
I have worked so hard on this unit to get it to this point. It would be shame if I could not get it to work for my amateur radio station
Thanks, Fred
VE3WN / VE3PIE
T1000 hookup to a demodulator
Tool Time!
-
Topic author - Rank 1
- Beiträge: 11
- Registriert: So 2. Apr 2023, 21:11
- Hauptanschluß:
Zurück zu „Machine Restoration“
Gehe zu
- Wichtiges
- ↳ Ankündigungen
- ↳ Foren-FAQ
- ↳ Feedback für Forum und Webseite
- Social
- ↳ Benutzer-Vorstellungen
- ↳ Maschinen-Vorstellungen / Register
- ↳ Talk-Café
- ↳ Dummheiten, die einem beim Umgang mit dem Fernschreiber passiert sind
- ↳ Termine, Veranstaltungen, Happenings...
- ↳ Off-Topic Extrem
- ↳ Telefonzelle
- ↳ Röhrenbude
- ↳ Bildschirmtext (BTX)
- ↳ Fernkopierer (FAX)
- ↳ Haupt- und Nebenuhren
- Telex-Netzwerk
- ↳ i-Telex allgemein
- ↳ Technischer Support (i-Telex)
- ↳ Firmware-Feedback
- ↳ piTelex allgemein
- ↳ Technischer Support (piTelex)
- ↳ Media
- ↳ Dienste
- ↳ Entwickler-Ecke
- ↳ i-Telex Dev
- ↳ piTelex Dev
- Fernschreibtechnik
- ↳ Anwender- und Verständnisfragen
- ↳ Grundsätzliche Fragen zur Technik
- ↳ Tipps und Tricks
- ↳ Zubehör/Tools
- ↳ Fragen, die sonst nirgendwo hin passen würden...
- ↳ Technischer Support (sonstige Fernschreibtechnik)
- ↳ Siemens
- ↳ Fernschreiber
- ↳ T34 und früher
- ↳ T37
- ↳ T68D
- ↳ T100
- ↳ T1000
- ↳ T1200
- ↳ T4200
- ↳ Sonstige Fernschreiber
- ↳ Lochstreifengeräte
- ↳ Sonstige FS-Technik
- ↳ Messgeräte
- ↳ Vermittlungstechnik
- ↳ SEL/Lorenz
- ↳ Fernschreiber
- ↳ Lo15 und früher
- ↳ Lo133
- ↳ Lo200x
- ↳ Lo3000
- ↳ Lo3003
- ↳ Sonstige Fernschreiber
- ↳ Lochstreifengeräte
- ↳ Sonstige FS-Technik
- ↳ RFT
- ↳ Fernschreiber
- ↳ T51
- ↳ F1x00
- ↳ F2000
- ↳ F2500
- ↳ Sonstige Fernschreiber
- ↳ Lochstreifengeräte
- ↳ Sonstige FS-Technik
- ↳ TeKaDe
- ↳ Hasler
- ↳ Olivetti
- ↳ Teletype
- ↳ Creed
- ↳ Andere Hersteller
- ↳ Media
- International Section
- ↳ General Discussion
- ↳ Service and Support
- ↳ Machine Restoration
- ↳ RTTY
- ↳ Off-Topic
- Marktplatz für Fernschreibtechnik und Zubehör
- ↳ Suche
- ↳ Erledigt (Suche)
- ↳ FS-Mitfahrgelegenheiten / Beiladungen
- ↳ Erledigt (Transporte)