Serial over TCP Thema ist als GELÖST markiert

Anything that isn't support related
Benutzeravatar

detlef
Rank 12
Rank 12
Beiträge: 3542
Registriert: Do 28. Mär 2019, 09:10
Wohnort: Marburg
Hauptanschluß: 7822222 hael d

Re: Serial over TCP

#11

Beitrag: # 20291Beitrag detlef »

Does Paul use a TW39/serial card with USB option?
Then a Serial-over-Ethernet adapter is the wrong device. An USB-over-Ethernet would fitt.
Gruß, Detlef

i-Telex: 7822222 (T1000), 114288 (F1300), 211230 (T100Z), 96868 (T37), 24394 (T68d)
Konferenzdienst: 11160 / 11161, Rundsender: 11162 / 11163 , Baudot-Bilder: 11166
Chat-GPT: 11168, Mail- und Fax-Dienst: 11170 / 11171, hist. Auskunft 1987: 40140, Wetterdienst: 717171

Topic author
PaulHeller
Rank 2
Rank 2
Beiträge: 85
Registriert: Sa 19. Aug 2017, 06:09
Hauptanschluß:

Re: Serial over TCP

#12

Beitrag: # 20294Beitrag PaulHeller »

Thank you for the helpful replies. My objective is to create a stand-alone system for remote I-telex access which does not require a dedicated PC. I did this in Arvada and it works very well. The setup In Arvada is using a serial RS-232 connection and a serial over Ethernet adapter. I am using the I-telex Usb serial interface card at my new location in Austria. It sounds like the best for me now would be to swap this card for an I-telex rs-232 serial interface card. I will do that and report back here.

I wish you all a nice day.
Paul - W2TTY
Austria: 39286 drwal a : Siemens T100S
US: 80003 w2tty : Teletype Model 32
US: 468466 expt d : Lorenz 15C

Topic author
PaulHeller
Rank 2
Rank 2
Beiträge: 85
Registriert: Sa 19. Aug 2017, 06:09
Hauptanschluß:

Re: Serial over TCP

#13

Beitrag: # 20407Beitrag PaulHeller »

Update: I switched over to using a raspberry PI for the TCP/Serial interface. All works fine now. Fred, you were right in your assessment.

I am very pleased with the setup. I use a VPN so that the direct port for the TCP communication is not on the internet. The only port open to the internet is port 134 for i-Telex (and of course the VPN port). I'm using noip to deal with any changes to my ipaddress for the vpn.

I am using a raspberry Pi 3B+ running Raspberry PI OS (formerly Raspbian) running the following software:
  • ser2net
  • pivpn
  • noip update client
The Raspberry PI is connected via USB cable to the i-Telex serial port.

In windows I am using Johannes' very fine i-Telex USB Terminal program, com0com, and com2tcp

With this setup I can VPN into my network from anywhere in the world and check for i-Telex messages on the serial port.
Folgende Benutzer bedankten sich beim Autor PaulHeller für den Beitrag (Insgesamt 3):
380170JFKFredSonnenreinBjoernS
Paul - W2TTY
Austria: 39286 drwal a : Siemens T100S
US: 80003 w2tty : Teletype Model 32
US: 468466 expt d : Lorenz 15C
Antworten

Zurück zu „General Discussion“